Name: THS4120IDGNG4
Brand: Texas Instruments
SKU: THS4120IDGNG4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Package / Case	HTSSOP EP
Surface Mount	YES
Number of Pins	8
Weight	24.408939mg
Packaging	Rail/Tube
JESD-609 Code	e4
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	820MOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Subcategory	Operational Amplifier
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Pin Count	8
Operating Supply Voltage	3.3V
Number of Elements	1
Temperature Grade	INDUSTRIAL
Max Supply Voltage	3.5V
Min Supply Voltage	3V
Power Dissipation-Max	1.71W
Operating Supply Current	11mA
Nominal Supply Current	13.5mA
Power Dissipation	1.71W
Slew Rate	55 V/μs
Amplifier Type	OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio	64 dB
Current - Input Bias	1.2pA
Max Input Voltage	-100mV
Output Current per Channel	100mA
Input Offset Voltage (Vos)	8mV
Bandwidth	100MHz
Gain Bandwidth Product	100MHz
Voltage Gain	66dB
Power Supply Rejection Ratio (PSRR)	68dB
Settling Time	60 ns
Max Dual Supply Voltage	1.75V
-3db Bandwidth	100MHz
Min Dual Supply Voltage	1.5V
Dual Supply Voltage	1.65V
Max I/O Voltage	8mV
Height	1.02mm
Length	3mm
Width	3mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

THS4120IDGNG4 Product Details

THS4120IDGNG4 Overview

Packaging for the buffer amplifier is in the form of a HTSSOP EP case. A OPERATIONAL AMPLIFIER-type buffer amplifier is shown here. There is a Rail/Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3.3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 8mV. Using a supply current of 11mA , this buffer op amp will be able to operate. Keeping the voltage gain at 66dB is the best course of action. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. You should not use op amp above 85°C degrees. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3.3V. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 3.5V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 3V, it is recommended to keep it higher. This electronic part should be conducted with a dual supply voltage of 1.75V volts for this part. It is recommended to keep the buffer amps resistance within the range of 820MOhm.