Welcome to Hotenda.com Online Store!

logo
userjoin
Home

THS4505DGK

THS4505DGK

THS4505DGK

Texas Instruments

1 Channels 130mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 4.5V~15V ±2.25V~7.5V THS4505 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

SOT-23

THS4505DGK Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 6 Weeks
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount YES
Number of Pins 8
Weight 23.303308mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 10MOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Max Power Dissipation 385mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number THS4505
Pin Count 8
Qualification Status Not Qualified
Number of Channels 1
Operating Supply Current 16mA
Nominal Supply Current 20mA
Power Dissipation 385mW
Max Supply Current 17mA
Slew Rate 1800V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type Differential
Common Mode Rejection Ratio 74 dB
Current - Input Bias 4μA
Max Input Voltage -2.7V
Voltage - Supply, Single/Dual (±) 4.5V~15V ±2.25V~7.5V
Output Current per Channel 130mA
Input Offset Voltage (Vos) 7mV
Bandwidth 260MHz
Gain Bandwidth Product 210MHz
Neg Supply Voltage-Nom (Vsup) -5V
Unity Gain BW-Nom 210000 kHz
Voltage Gain 54dB
Average Bias Current-Max (IIB) 5.2μA
Power Supply Rejection Ratio (PSRR) 72dB
Low-Offset NO
Frequency Compensation YES
Voltage - Input Offset 4mV
Settling Time 20 ns
Low-Bias NO
Micropower NO
-3db Bandwidth 20MHz
Bias Current-Max (IIB) @25C 4.6μA
Programmable Power NO
Dual Supply Voltage 5V
Max I/O Voltage -7mV
Height 1.07mm
Length 3mm
Width 3mm
Thickness 970μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.04000 $6.04
10 $5.42600 $54.26
80 $5.13000 $410.4
160 $4.44600 $711.36
560 $3.78480 $2119.488
1,040 $3.19200 $3.192
2,560 $3.03240 $6.0648
THS4505DGK Product Details

THS4505DGK Overview


The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. The instrumentation amplifier in this picture is of the Differential-type. Linear amplifier is delivered in a Tube case. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 7mV. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 16mA . There should be no change in the voltage gain. 1 channels are available on the instrumentation amplifier. It is recommended to keep the instrumentation amplifier resistance within the range of 10MOhm.

THS4505DGK Features


8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 10MOhm

THS4505DGK Applications


There are a lot of Texas Instruments THS4505DGK Instrumentational OP Amps applications.

  • Logarithmic operation circuits
  • RF cable systems
  • Laptop
  • Industrial control system
  • Biopotential
  • Semiconductor detectors
  • Cinema or auditorium audio system
  • Home audio systems
  • Signal transformation
  • Power generator

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News