Name: TL032CDE4
Brand: Texas Instruments
SKU: TL032CDE4
Availability: InStock

new-10%

TL032CDE4

Manufacturer part number:TL032CDE4

Manufacturer:Texas Instruments

Description:40mA per Channel 2pA 70 dB Instrumentational OP Amps 0.0004μA 10V~30V ±5V~15V TL032 8 Pins 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:TL032CDE4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Gold
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Subcategory	Operational Amplifier
Technology	BIFET
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Base Part Number	TL032
Pin Count	8
Number of Elements	2
Power Supplies	+-5/+-15V
Operating Supply Current	434μA
Nominal Supply Current	560μA
Output Current	40mA
Slew Rate	5.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	J-FET
Common Mode Rejection Ratio	70 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	10V~30V ±5V~15V
Output Current per Channel	40mA
Input Offset Voltage (Vos)	570μV
Bandwidth	1.1MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	1100 kHz
Voltage Gain	81.58dB
Average Bias Current-Max (IIB)	0.0004μA
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	YES
Micropower	YES
Programmable Power	NO
Nominal Gain Bandwidth Product	1.1MHz
Max I/O Voltage	1.5mV
Power	NO
Input Offset Current-Max (IIO)	0.0001μA
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TL032CDE4 Product Details

TL032CDE4 Overview

The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. An op amp ic of the J-FET type. Instrumentation amplifier is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. The pins on this board total to 8 in total. This linear amplifier should be powered by an 5V battery. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 570μV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. A supply current of 434μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 81.58dB at all times. There is an operating supply voltage rating of 2 for this operational amplifier, which is rated at the manufacturer.