TL064CDBRE4 Overview

In order to protect the op amps, a 14-SSOP (0.209, 5.30mm Width) case is used. An op amp of this type is a J-FET-type. Linear amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. In this case, there are 14 pins on the board. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. In total, the buffer amplifier consists of 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 3mV. This electronic part is best mounted with type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 200μA and 10 . There should be no change in the voltage gain. There are 4 circuits on op amps. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design.

TL064CDBRE4 Features

14 Pins
supply voltage of 15V
75.56dB voltage gain

TL064CDBRE4 Applications

There are a lot of Texas Instruments TL064CDBRE4 Instrumentational OP Amps applications.

• Computer workstations
• Vehicle electronics
• Voltage regulation circuit
• Video conversion and routing
• Broadcasting
• Strain gauges
• single/dual op amp sum and difference circuits
• Differentiator circuits
• Video data acquisition
• Signal filtering