TL064ID Overview

In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a J-FET type op amp. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 14. A total of 14 pins are attached to buffer op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 6mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . As long as the supply current of the chip does not exceed 200μA, this op amp ic can operate. It is recommended to keep the voltage gain at 75.56dB at all times. On the buffer amps, there are 4 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 18V voltage.

TL064ID Features

14 Pins
supply voltage of 15V
75.56dB voltage gain

TL064ID Applications

There are a lot of Texas Instruments TL064ID Instrumentational OP Amps applications.

• Medical imaging
• Measurements of Wheatstone bridge
• Oscilloscopes
• Television
• Television broadcasting equipment
• Non-polarized electrodes
• Micro signal measurement
• Power control
• Displayers for aircraft and air transportation control systems
• High gain DC amplifier