TL072BCDG4 Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A J-FET-type buffer amplifier is shown here. Linear amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. There are a total of 8 pins on this op amp. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 3mV voltage. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at 0°C~70°C , which is a good operating temperature. It is possible to operate this buffer amplifier from a supply current of 1.4mA . There should be no change in the voltage gain. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 18V.
TL072BCDG4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL072BCDG4 Applications
There are a lot of Texas Instruments TL072BCDG4 Instrumentational OP Amps applications.
- Strain gauges
- single/dual op amp sum and difference circuits
- Television
- Television broadcasting equipment
- Displayers for aircraft and air transportation control systems
- PDA
- Inverse/same-phase proportional circuit
- Radiation thermometry transducers
- Signal filtering
- Automotive sensors
