TL072CDG4 Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. A J-FET-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be at least 8 terminations this year. In total, there are 8 pins on this op amp ic. Please take in mind that op amp should be run at 15V. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. There is an input offset voltage of 10mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. Operational amplifier can operate supply current at 1.4mA. 106.02dB should be the voltage gain. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 18V.

TL072CDG4 Features

8 Pins
supply voltage of 15V
106.02dB voltage gain

TL072CDG4 Applications

There are a lot of Texas Instruments TL072CDG4 Instrumentational OP Amps applications.

• Communication device
• Large motor controllers
• Industrial applications including automation
• Laptop
• Thermocouples
• Proportional operation circuits
• Proportional counter tubes
• Automation control systems
• RF cable systems
• Video data acquisition