TL072CPE4 Overview
In order to protect the op amps, a 8-DIP (0.300, 7.62mm) case is used. A J-FET-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. The number of terminations is approaching the 8 mark. In total, there are 8 pins on this op amp ic. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. In total, the buffer amplifier consists of 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. This electronic part is best mounted with type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. As long as the supply current of the chip does not exceed 1.4mA, this op amp ic can operate. There should be no change in the voltage gain at 106.02dB. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. The operating supply voltage of the buffer op amp is rated at 18V.
TL072CPE4 Features
8 Pins
supply voltage of 15V
106.02dB voltage gain
TL072CPE4 Applications
There are a lot of Texas Instruments TL072CPE4 Instrumentational OP Amps applications.
- Cinema or auditorium audio system
- Portable docking station
- Gaming industry
- High-frequency data acquisition systems
- Polarized electrodes
- Proportional counter tubes
- Switching amplifier
- Commercial audio systems
- Automotive sensors
- Industrial control system
