TL074CDG4 Overview

The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case which makes it easy for the consumer to handle. Buffer amps of this type are called J-FET-types. The op amp is delivered to you in a Tube case. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. A total of 14 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 10mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . A supply current of 1.4mA can be used to operate this linear amplifier. 106.02dB should be the voltage gain. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. The operating supply voltage of the buffer op amp is rated at 18V.

TL074CDG4 Features

14 Pins
supply voltage of 15V
106.02dB voltage gain

TL074CDG4 Applications

There are a lot of Texas Instruments TL074CDG4 Instrumentational OP Amps applications.

• High-frequency data acquisition systems
• Portable electronic products powered by batteries
• Signal filtering
• Portable docking station
• Image computer boards
• High input resistance broadband
• Computer workstations
• Measurements of Wheatstone bridge
• Thermocouples
• Communication