TL082IDG4 Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 8-pin op amp ic is included in the package. Regarding input offset voltage, op amp rates 6mV. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. It is possible to operate this buffer amplifier from a supply current of 1.4mA . Keeping the voltage gain at 106.02dB is the best course of action. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V.

TL082IDG4 Features

8 Pins
supply voltage of 15V
106.02dB voltage gain

TL082IDG4 Applications

There are a lot of Texas Instruments TL082IDG4 Instrumentational OP Amps applications.

• pH (acidity)
• Proportional counter tubes
• Weak signal detection
• Multiplication circuits
• Medical imaging
• Television
• Portable electronic products powered by batteries
• Proportional operation circuits
• Communication device
• Power control