TL1451ACPWG4 Overview

With its TSSOP package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 6V is input. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 2.5V. Switching controllers work at 500kHz Hz. Temperatures should be kept at -20°C or higher. There should be 85°C more than 85°C degrees Celsius in the machine. Total number of functions (s) for thare switch converters are 1. DC switching uses 1.7mA when it is dormant. There is a design for voltage regulators switching with 16 pins. Maximum frequency of the controller is 500kHz. A nominal working status is achieved when the input voltage is set to 3.6V. In order to ensure the dc switcher's functionality, users must limit the voltage to 50V due to the dc switcher's maximum input voltage. Input values of 3A make it ideal for switching controllers. normalworking processes output 50V voltage. In order to use a 3.6V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 3A. Datasheets state the switching converter can output up to 50V volts. At least 1V voltage is output by the voltage controller. Maximum supply voltage is 50V.

TL1451ACPWG4 Features

PULSE WIDTH MODULATION
Frequency: 500kHz

TL1451ACPWG4 Applications

There are a lot of Texas Instruments
TL1451ACPWG4 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots