TL2842DR-8 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 10V~30V. Suitable for working in an dc switcher that has a -40°C~85°C TA. The switching controller can be switched at Up to 500kHz. Surface Mount makes it suitable for general dc dc regulator. Frequency Control is used for efficient switching control in the dcdc regulator. SWITCHING REGULATOR analog IC connects the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 8 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 15V. TL2842 can be searched for other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 30V. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. Switching controllers operate at 500kHz frequencies. DC switchings that are dormant use 11mA. Input voltage can be set to 5.5V for nominal working status. A supply voltage of 15V is required. The controller should not be supplied with more current than 30mA.

TL2842DR-8 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL2842DR-8 Applications

There are a lot of Texas Instruments TL2842DR-8 DC to DC converter applications.

• Combined machine tools
• Pipe bending machines
• Industrial robots
• Access control systems
• Mobile phones
• Ball screw pair
• Various precision measuring detectors
• Remotely powered electric motors
• Telecommunications equipment
• Smart grid