TL2845BDRG4-8 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 7.6V~30V volts and has 7.6V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at Up to 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "TL2845", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 30V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 500kHz is set for the switching controller. It is possible to set the input voltage as 5.5V for nominal working statuses. This voltage controller requires a supply voltage of 15V. It is important that the controller is supplied with 30mA more than 30mA volts of current.

TL2845BDRG4-8 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 500kHz

TL2845BDRG4-8 Applications

There are a lot of Texas Instruments
TL2845BDRG4-8 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment