TL3016IPWRG4 Overview
In order to make transportation easier, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .A comparator with an output type of Complementary, Push-Pull, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In general, the chip type can be classified as with Latch .A total of 1 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for TL3016 to find more pin-to-pin solutions for your specific needs.There is 12.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 12.5mA .A current supply greater than 12.5mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 10μA current into the device.The device is acceptable to pack by TR .
TL3016IPWRG4 Features
Complementary, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 12.5mA
TL3016IPWRG4 Applications
There are a lot of Texas Instruments
TL3016IPWRG4 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
