TL3842D-8 Overview

As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 10V~30V. Worked in an dc switcher with a 0°C~70°C TA rating. There is a switch at Up to 500kHz that can be used with this controller. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Frequency Control for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 8 of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. A search for "TL3842" will reveal other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 30V voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. A frequency of 500kHz is used by the switching controller. It is possible to set the input voltage as 5.5V for nominal working statuses. There must be a voltage supply of 15V volts. Current supplied to the controller should not exceed 30mA.

TL3842D-8 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL3842D-8 Applications

There are a lot of Texas Instruments TL3842D-8 DC to DC converter applications.

• Linear guide
• CMM
• Constant current circuits
• Electrical distribution systems
• Direct power supply system
• Computer monitoring equipment of building
• Access control systems
• Smoke prevention equipment
• Pipe bending machines
• Various precision measuring instruments