TL494CDRG4 Overview

With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7V~40V. Suitable for work in a 0°C~70°C TA dc switcher. A switching controller such as this can switch at a value of 1kHz~300kHz . The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 16 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. Other relevant dc to dc converter ics can be found by searching "TL494". There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 7V. According to the test statistics, DC regulator outputs 40V voltage. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. Switching controller operates at a frequency of 300kHz. There is a requirement for a 15V supply voltage.

TL494CDRG4 Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

TL494CDRG4 Applications

There are a lot of Texas Instruments TL494CDRG4 DC to DC converter applications.

• Electrical power transmission
• Machining centers
• Access control systems
• Nuclear power plants
• Lathes
• Medical equipment
• Printing
• Electric water heaters
• Elevator lighting
• Flaw detection equipment