TL5001CDG4 Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). A 3.6V~40V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -20°C~85°C TA rating. In this switching controller, the switch can be set to 20kHz~500kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. TL5001 can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 8. Statistically, the DC regulator outputs 50V voltage. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. DC regulator's maximum frequency is 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. The dc switching utilizes 1.1mA when it is in a dormant state. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. A voltage of 3.6V must be present in the supply. The dc switcher will not provide an output current greater than 3A. At its maximum output, the switching converter can provide 50V volts. There is 1V voltage output lower than 1V on the voltage controller.

TL5001CDG4 Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION

TL5001CDG4 Applications

There are a lot of Texas Instruments TL5001CDG4 DC to DC converter applications.

• Flexible manufacturing cells
• Computer application technology
• Computer rooms
• Adjustable voltage or current linear circuits
• Textile machinery
• Balance equipment
• Grinders
• USB circuits
• seismic instrument power circuits
• Medical equipment