8 Terminals 3.6V~40V 8-Pin TL5001 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 20kHz~500kHz Transistor Driver
SOT-23
TL5001CDRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 1 week ago)
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
8
Weight
72.603129mg
Operating Temperature
-20°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Base Part Number
TL5001
Function
Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs
1
Output Voltage
50V
Output Type
Transistor Driver
Max Output Current
3A
Operating Supply Voltage
40V
Input Voltage-Nom
6V
Analog IC - Other Type
SWITCHING CONTROLLER
Output Configuration
Positive
Output Current
20mA
Voltage - Supply (Vcc/Vdd)
3.6V~40V
Quiescent Current
1.1mA
Control Features
Dead Time Control, Frequency Control
Max Output Voltage
50V
Topology
Buck, Boost, Flyback
Min Input Voltage
3.6V
Control Mode
VOLTAGE-MODE
Frequency - Switching
20kHz~500kHz
Max Input Voltage
40V
Control Technique
PULSE WIDTH MODULATION
Synchronous Rectifier
No
Min Output Voltage
1V
Switcher Configuration
SINGLE
Max Frequency
500kHz
Duty Cycle (Max)
100%
Height
1.75mm
Length
4.9mm
Width
3.91mm
Thickness
1.58mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
TL5001CDRG4 Product Details
TL5001CDRG4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 3.6V~40V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -20°C~85°C TA. Using this switching controller, it is possible to switch at 20kHz~500kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 6V. You can find other relevant dc to dc converter ics by searching "TL5001". Pins number 8 of switching converter in total. Test statistics indicate DC regulator outputs 50V voltage. In most cases, the dc dc regulator's output current is 20mA. This information should be noted when you begin working with the component. It is estimated that this dc regulatorhas a maximum frequency of 500kHz. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. A dc switching in a dormant state uses 1.1mA. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. Voltage 3.6V is needed for the supply. There will be 3A current output from the dc switcher above 3A. The datasheet indicates that the switching converter can output 50V volts at its maximum. 1V voltage output is lower than 1V.
TL5001CDRG4 Features
Transistor Driver Outputs Switching Frequency: 20kHz~500kHz Dead Time Control, Frequency Control PULSE WIDTH MODULATION
TL5001CDRG4 Applications
There are a lot of Texas Instruments TL5001CDRG4 DC to DC converter applications.