8 Terminals 8-Pin DC to DC converter IC SWITCHING CONTROLLER 1 Outputs
SOT-23
TL5001IDG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Package / Case
SOIC
Surface Mount
YES
Number of Pins
8
Weight
72.603129mg
JESD-609 Code
e4
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
85°C
Min Operating Temperature
-25°C
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Pin Count
8
Number of Outputs
1
Max Output Current
3A
Operating Supply Voltage
40V
Input Voltage-Nom
6V
Temperature Grade
INDUSTRIAL
Analog IC - Other Type
SWITCHING CONTROLLER
Current - Output
20mA
Quiescent Current
1.1mA
Frequency (Max)
500kHz
Max Output Voltage
50V
Voltage - Output
50V
Topology
Boost, Flyback
Min Input Voltage
3.6V
Control Mode
VOLTAGE-MODE
Max Input Voltage
40V
Control Technique
PULSE WIDTH MODULATION
Min Output Voltage
1V
Switcher Configuration
SINGLE
Duty Cycle (Max)
100 %
Height
1.58mm
Length
4.9mm
Width
3.91mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Lead Free
TL5001IDG4 Product Details
TL5001IDG4 Overview
Capsuled in the SOIC package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 6V. Pins number 8 of switching converter in total. Users should apply 40V to operate the voltage regulator dc to dc safely and reliably. At least -25°C°C is recommended. At85°C, dc regulator should run. 1 functions are available in total for the switch converters. A dc switching in a dormant state uses 1.1mA. We design voltage regulators switchings with 8 pins. The controller can set a maximum frequency of 500kHz. The maximum input voltage of dc switcher is 40V, so users should limit their voltage accordingly. With 20mA inputs, switching controller is ideal. It outputs a value of 50V in normaloperating procedures. Voltage 3.6V is needed for the supply. There will be 3A current output from the dc switcher above 3A. The datasheet indicates that the switching converter can output 50V volts at its maximum. 1V voltage output is lower than 1V.
TL5001IDG4 Features
PULSE WIDTH MODULATION
TL5001IDG4 Applications
There are a lot of Texas Instruments TL5001IDG4 DC to DC converter applications.