TL5001IDRG4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 3.6V~40V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. It can switch at 20kHz~500kHz. dc dc regulators can be carried out with Surface Mount. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminal (s) are designed at DUAL . Different dc switching's functions can be applied to 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 6V. In addition to "TL5001", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. DC regulator outputs 50V voltage according to the test statistics. The dc dc regulator's usual output current is 20mA, which should be noted down when you start a project. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. The max frequency of the pmic can reach 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 40V. DC switching uses 1.1mA when it is dormant. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 3.6V must be supplied. The dc switcher will not provide an output current greater than 3A. As per its datasheet, the switching converter has a maximum output of 50V volts. Its lowest voltage output is not less than 1V.

TL5001IDRG4 Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %

TL5001IDRG4 Applications

There are a lot of Texas Instruments TL5001IDRG4 DC to DC converter applications.

• Digital precision reference circuits
• Hydraulic presses
• Flaw detection equipment
• Window air conditioners
• Handheld GPS
• seismic instrument power circuits
• Grinders
• Communication system
• Energy management systems
• Balance equipment