TL5002CD Overview

In the 8-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 3.6V~40V volts and has 3.6V~40V supply voltage. Qualified to work in a -20°C~85°C TA dc switcher. It can switch at 20kHz~500kHz. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Dead Time Control, Frequency Control for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 8 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 6V. Other relevant dc to dc converter ics will be returned if you search "TL5002". Pins number 8 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 3.6V. A 40V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 21mA. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. Switching controllers work at 500kHz Hz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 40V.

TL5002CD Features

Transistor Driver Outputs
Switching Frequency: 20kHz~500kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL5002CD Applications

There are a lot of Texas Instruments TL5002CD DC to DC converter applications.

• Elevator lighting
• Electric water heaters
• Hydraulic presses
• Adjustable voltage or current linear circuits
• Energy management systems
• Photovoltaic power
• PSRR circuits
• Electrical power transmission
• Servo drive system
• Arc suppression circuits