TL594CDR Overview

With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. The system can process Transistor Driver dc switching's outputs (s). 7V~40V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with 0°C~70°C TA. This switching controller can switch at 1kHz~300kHz. A generalization of dc dc regulator can be made using Surface Mount. Dead Time Control, Frequency Control provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. The 16 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 15V. TL594 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. 7V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 40V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 45 %. Switching controller operates at 300kHz Hz. Dormant dc switchings use 12.4mA. The supply voltage must be 15V.

TL594CDR Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

TL594CDR Applications

There are a lot of Texas Instruments TL594CDR DC to DC converter applications.

• Die casting equipment
• Refrigerators of central air conditioners
• Program control systems
• Automation technology
• Flaw detection equipment
• Electrical distribution systems
• Shearing machines
• Imported equipment
• Digital precision reference circuits
• Medical equipment