TL594CPWRG4 Overview

With a 16-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 7V~40V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with 0°C~70°C TA. There is a switch at 1kHz~300kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a DUAL terminal on the switching converters. An array of 16 terminations of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. In addition to "TL594", there are other relevant dc to dc converter ics you can find. Pins number 16 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. Input voltage of dc dc voltage regulator must be 7V. Statistically, DC regulator outputs 40V volts. You should note down the dc dc regulator's usual output current of 200mA when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 45 % to ensure reliability during power-up and power-down. The switching controller works at a frequency of 300kHz. There is a requirement for a 15V supply voltage.

TL594CPWRG4 Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

TL594CPWRG4 Applications

There are a lot of Texas Instruments TL594CPWRG4 DC to DC converter applications.

• Telecommunications equipment
• Current source circuits
• Hydrogen power
• Various precision measuring instruments
• Fire elevators
• Gear/thread machining machines
• Emergency lighting monitoring equipment
• Plate bending machines
• Machining centers
• Computer monitoring equipment of building