TL712CDRG4 Overview
In order to make transportation easier, it is packaged in SOIC .A comparator with an output type of TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.A total of 8 pins are included.The comparator consists of 8 pins.There is 20mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 20mA .A current supply greater than 20mA may cause the comparator to malfunction.The device can be run with 5V power supplies.In general, temperatures higher than 70°C are not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 5.25V volts.Using a voltage as low as 4.75V is possible for this comparator.For the output quality to be maintained, 1 channels work together.There is essentially a very high gain COMPARATOR amplifier in the comparator.For normal operation, there should be 5V operating supply voltage applied.
TL712CDRG4 Features
TTL output capability
Quiescent Current: 20mA
COMPARATOR amplifier
TL712CDRG4 Applications
There are a lot of Texas Instruments
TL712CDRG4 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
