TL7702BCD Overview

Power management is mounted through 8 terminals. Packaging is in the form of a Tube. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. 8 pins are present in total in this power management. 8 pins make up the power management. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 3.6V. Voltage (Vsup) shouldn't exceed 18V volts in this PMIC. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. There is an output voltage of Complementary from this supervisor when it is operating. The supply current of the power management is 1.8mA. Additionally, IC management are a variety of features, for example [0], to name a few. A similar IC managements number of the manufacturer can always be found by using TL7702, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 3.5mA.

TL7702BCD Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current

TL7702BCD Applications

There are a lot of Texas Instruments TL7702BCD Voltage Supervisors applications.

• Kitchen appliances
• Solar power charger
• Low voltage/high power - AI, GPU
• Linux and server computing
• Radar
• Rechargeable batteries
• Telecommunications equipment
• Detection of phase sequence
• Personal computers
• Analog circuit