TL7705BIDR Overview

There are 8 terminals on this power management that allow it to be mounted. A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 5V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 8 pins on power management. Power managment ic pin count is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.6V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 18V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Complementary as the output voltage. The supervisor's supply current is specified to 1.8mA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TL7705, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 3.5mA at the most.

TL7705BIDR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 3.6V
1.8mA operating supply current

TL7705BIDR Applications

There are a lot of Texas Instruments TL7705BIDR Voltage Supervisors applications.

• Power distribution systems of CCU
• Multi-voltage system
• Dash board
• Fire equipment power monitoring system
• Urban rail transit weak current power monitoring
• Detection of phase sequence
• Kitchen appliances
• Power communication system
• DVR
• Battery-powered equipment