TL7712ACDG4 Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 1. The power management belongs to the Power Management Circuits subcategory. Taking into account all of the pins, this power management has a total of 8. There are 8 pins on the supervisor. There should be a minimum voltage supply (Vsup) of 3.5V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 18V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. During normal operation, this power managment ic can generate Complementary of output voltage. For this power management, there is an 3mA volt supply current. To find similar IC managements from the manufacturer, you can always search by TL7712. At most, voltage supervisor can operate at a supply temperature of 3mA.
TL7712ACDG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 3.5V
3mA operating supply current
TL7712ACDG4 Applications
There are a lot of Texas Instruments TL7712ACDG4 Voltage Supervisors applications.
- Multi-voltage system
- Military communications
- Power communication system
- Leakage current detection
- FPGA design
- Efficient information transmission
- DVR
- Electronics installed in the vehicle
- Battery-powered equipment
- Automotive permanent magnet synchronous motors
