TL7770-5CN Overview

As you can see, this power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Power management consists of 2 channels, each of which can be used independently. There are 16-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 2. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 16 pins are located on this power management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 3.5V. The supply voltage (Vsup) should not exceed 18V volts in this IC power. Power management recommends the Through Hole mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. As this power managment ic operates, it is able to produce an output voltage of Complementary. There is a 5mA supply current present in the power management. Additionally, there are many other features that can be found inside of the power management, such as [0]. A similar IC managements number of the manufacturer can always be found by using TL7770, the base power ics number. The maximum supply temperature voltage supervisor can handle is 5mA.

TL7770-5CN Features

Multi-Voltage Supervisor type
Minimum supply voltage of 3.5V
5mA operating supply current

TL7770-5CN Applications

There are a lot of Texas Instruments TL7770-5CN Voltage Supervisors applications.

• Detection of phase imbalance
• Leakage protection
• Unattended substation automation
• Power distribution systems of operating room
• Smart meter
• Detection of phase sequence
• Electric heating appliances
• Multi-voltage system
• Household appliances
• WiFi router