TLC14ID Overview

Packaged in a 8-SOIC (0.154, 3.90mm Width) package, it is easy to install.Packaged in a Tube format, it is a very good product.In the case of this gadget, the mounting type is Surface Mount.The filter type for this part is Butterworth, Low Pass Switched Capacitor.With a power source of 5V~12V, it should work.8-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the TLC14.In terms of frequency, it is at a cutoff or center frequency of 30kHz.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 5V is used as a source of power for the component.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 8 is the pin number of the component.As you can see from the picture, there are a number of 8 terminals on the device.In 1 circuits, there are various types of circuits.Depending on the model, the maximum supply temperature can be raised to 3mA.This is one of a number of Surface Mount mount packages that are included with the package.A DC DC switching regulator, in this case, operates by operating on a supply voltage of 9V.In spite of this, it is still able to perform accurately at the 3MHz frequency.The voltage that it needs in order to function correctly is 6V, so the voltage must be applied to it.To make this device work, a supply voltage of 2.25V must be applied.

TLC14ID Features

Supply voltage of 5V
Maximum operating temperature of 85°C
1 circuits
Mount of Surface Mount
3MHz frequency

TLC14ID Applications

There are a lot of Texas Instruments
TLC14ID active filters applications.

• Sample Rate Converters
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and HSP45106
• Quadrature, Complex Flterlng
• Image Processing
• Polyphase Flterng
• Adaptive Fllterlng
• Very Narrow Band Fllters
• Zoom Spectral Analysis