TLC2202IDG4 Overview
There is a 14-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. It is estimated that there will be 14 terminations in the next few months. It consists of a total of 14 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. Linear amplifier includes 14 pins. Op amp rates 1mV as input offset voltage. This electrical part should be mounted using type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using a supply current of 1.8mA , this buffer op amp will be able to operate. 109.97dB should remain the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 8V. LinCMOS? corresponds to the op amp's series.
TLC2202IDG4 Features
14 Pins
supply voltage of 5V
109.97dB voltage gain
Output Type: Rail-to-Rail
TLC2202IDG4 Applications
There are a lot of Texas Instruments TLC2202IDG4 Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Automation control systems
- High-frequency data acquisition systems
- Video data acquisition
- Test and measurement instruments
- Signal operation
- Computer workstations
- Exponential operation circuits
- Cinema or auditorium audio system
- Band-pass filter
