0.7pA 65 dB Instrumentational OP Amps 0.00006μA 1.4V~16V ±0.7V~8V TLC251 8 Pins 8-SOIC (0.209, 5.30mm Width)
SOT-23
TLC251CPSRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-SOIC (0.209, 5.30mm Width)
Number of Pins
8
Operating Temperature
0°C~70°C
Packaging
Tape & Reel (TR)
Series
LinCMOS™
Pbfree Code
yes
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Subcategory
Operational Amplifier
Packing Method
TAPE AND REEL
Terminal Position
DUAL
Terminal Form
GULL WING
Number of Functions
1
Supply Voltage
5V
Base Part Number
TLC251
Pin Count
8
Number of Circuits
1
Operating Supply Current
950μA
Nominal Supply Current
2mA
Slew Rate
5.3V/μs
Architecture
VOLTAGE-FEEDBACK
Amplifier Type
General Purpose
Common Mode Rejection Ratio
65 dB
Current - Input Bias
0.7pA
Voltage - Supply, Single/Dual (±)
1.4V~16V ±0.7V~8V
Input Offset Voltage (Vos)
1.1mV
Bandwidth
1.7MHz
Gain Bandwidth Product
2.2MHz
Unity Gain BW-Nom
1700 kHz
Voltage Gain
87.23dB
Average Bias Current-Max (IIB)
0.00006μA
Low-Offset
NO
Frequency Compensation
YES
Low-Bias
YES
Bias Current-Max (IIB) @25C
0.00006μA
Programmable Power
YES
Height Seated (Max)
2mm
Length
6.2mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
TLC251CPSRG4 Product Details
TLC251CPSRG4 Overview
The linear amplifier is packaged in a 8-SOIC (0.209, 5.30mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 1.1mV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . A supply current of 950μA can be used to operate this linear amplifier. 87.23dB should be the voltage gain. There are 1 circuits on this op amp. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method. This buffer amplifier is assigned within the LinCMOS? series by its manufacturer.
TLC251CPSRG4 Features
8 Pins supply voltage of 5V 87.23dB voltage gain
TLC251CPSRG4 Applications
There are a lot of Texas Instruments TLC251CPSRG4 Instrumentational OP Amps applications.