TLC25L4BCN Overview

In the package, you will find a 14-DIP (0.300, 7.62mm)-case to contain the op amp ic. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 14. In total, there are 14 pins on this op amp ic. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. Instrumentation amplifier is a part of Operational Amplifier. There are 14 pins on this chip. Regarding input offset voltage, buffer amplifier rates 260μV voltage. The mounting type that is recommended for this electrical part is Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around 0°C~70°C . The buffer amplifier is capable of operating from a supply current of 57μA . There should be no change in the voltage gain at 114.32dB. A linear amplifier like this has 4 circuits on it. The operating supply voltage of the buffer op amp is rated at 8V. The LinCMOS? stands for the buffer op amp's serial number.

TLC25L4BCN Features

14 Pins
supply voltage of 5V
114.32dB voltage gain

TLC25L4BCN Applications

There are a lot of Texas Instruments TLC25L4BCN Instrumentational OP Amps applications.

• Communication
• Voltage regulation circuit
• Communication device
• Signal amplification
• High input resistance broadband
• Micro signal measurement
• Non-polarized electrodes
• Industrial applications including automation
• Large motor controllers
• Band-stop filter