TLC339CDR Overview

In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, Open-Drain output on this device.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has 14 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.There are 14 pins on this board.The recommended mounting type is Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator is equipped with 14 pins.Try search TLC339 to get more pin-to-pin solutions for your special needs.As a result, this comparator displays a quiescent current of 100μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 80μA when using the device.The compartator could be damaged if the current supply exceeds 20μA .The device can be powered by 5V power supplies.The maximal current your can input into the device is 5pA .The part belongs to the series of comparator LinCMOS? .For normal operation, the operating supply voltage must be 5V .Comparator electronics is acceptable to pack the device by TR .

TLC339CDR Features

CMOS, Open-Drain output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA

TLC339CDR Applications

There are a lot of Texas Instruments TLC339CDR linear comparators applications.

• Building automation
• Security Detection Systems
• Limit Comparators
• Power management
• Mobile Communications
• High-Speed Differential Line Receiver
• Battery-Powered Electronics
• Mobile Phones and Tablets
• Metering Systems
• Point of load regulators