TLC339IDR Overview

A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, Open-Drain output.The part will be shipped by Cut Tape (CT) .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator families.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .As a result, it contains 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.The comparator is equipped with 14 pins.Search TLC339 to find more pin-to-pin solutions.There is a quiescent current of 125μA in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 80μA in order to use the device normally.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 20μA .In order to run the device, there are only 5V power supplies required.A maximum current of 5pA can be supplied to the device.This part is from the LinCMOS™ comparator series.The normal operation of the system requires 5V operating voltage.This device can be used in general (for example, in ADC circuits). It is packaged in TR .

TLC339IDR Features

CMOS, Open-Drain output capability
General Purpose IC
Operates under -40°C~85°C
Quiescent Current: 125μA

TLC339IDR Applications

There are a lot of Texas Instruments
TLC339IDR linear comparators applications.

• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics