TLC3702CDRG4 Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as General Purpose .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching TLC3702 .As a result, this comparator displays a quiescent current of 50μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 40μA when using the device.A supply current exceeding 40μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.A comparator part from the LinCMOS™ series is used in this part.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.The device is packed in TR and is intended for general use (as an element in the ADC circuit).
TLC3702CDRG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 50μA
TLC3702CDRG4 Applications
There are a lot of Texas Instruments
TLC3702CDRG4 linear comparators applications.
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
