TLC3702IPWRG4 Overview
To facilitate transportation, it comes packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Push-Pull, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.The board includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC3702 .A quiescent current of 65μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 40μA supply current.If the current supply exceeds 40μA , the comparator might be damaged.This device requires 5V power supplies to operate.The part is based on LinCMOS™ .The operating supply voltage for normal operation should be 5V .Comparator electronics is acceptable to pack the device by TR .
TLC3702IPWRG4 Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA
TLC3702IPWRG4 Applications
There are a lot of Texas Instruments
TLC3702IPWRG4 linear comparators applications.
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Limit Comparators
