TLC372CPE4 Overview
The product is packaged in PDIP in order to facilitate transportation.Output type of this comparator is TTL .The comparator has 8 terminals.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .The device includes 8 pins.8 pins are available on the comparator.A quiescent current of 400μA is observed in this comparator.A Through Hole is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 300μA .An excess of current supply over 150μA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.You are allowed to input a maximum current of 5pA into the device.There is no recommendation for temperatures higher than 70°C .Temperatures below 0°C are not suitable for the device.Compatibility is defined as 16V when the comparator is operating at its maximum supply voltage.A minimum supply voltage of 3V is allowed for this comparator.The output quality of 2 channels is maintained by cooperating with each other.Comparator electronics is essentially a highly gain-adjustable COMPARATOR amplifier that forms the comparator.Its output current is rated as 20mA .
TLC372CPE4 Features
TTL output capability
Quiescent Current: 400μA
COMPARATOR amplifier
TLC372CPE4 Applications
There are a lot of Texas Instruments
TLC372CPE4 linear comparators applications.
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
