TLC374CNSRG4 Overview
The product is packaged in SOP to facilitate transportation.Output type TTL is used for this comparator.This device is designed in Tape and Reel case.Electronic comparator is possible to find the 14 terminals of the comparator.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.The device contains 14 pins.14 pins are present on the comparator.The comparator presents a quiescent current of 800μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 600μA .The compartator could be damaged if the current supply exceeds 600μA .In order to operate the device, 5V power supplies are sufficient.Temperatures above 70°C are not recommended.A temperature lower than 0°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 16V .The comparator is capable of operating at a minimum supply voltage of 3V .For the output to be of high quality, 4 channels must cooperate together.A comparator consists essentially of a very high-gain COMPARATOR amplifier.This device is rated for 20mA mA output current.
TLC374CNSRG4 Features
TTL output capability
Quiescent Current: 800μA
COMPARATOR amplifier
TLC374CNSRG4 Applications
There are a lot of Texas Instruments
TLC374CNSRG4 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
