TLC4502MDG4 Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. A General Purpose-type buffer amplifier is shown here. The op amp is delivered to you in a Tube case. The number of terminations approaches 8. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. It has 8 pins that make up the linear amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 10μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . It is possible to operate this buffer amplifier from a supply current of 2.5mA . Maintain 120dB as the voltage gain. A instrumentation amplifier like this has 2 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The instrumentation amplifier is packed in the form of TR. LinEPIC?, Self-Cal? corresponds to the op amp's series.

TLC4502MDG4 Features

8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail

TLC4502MDG4 Applications

There are a lot of Texas Instruments TLC4502MDG4 Instrumentational OP Amps applications.

• Differentiator circuits
• Cinema or auditorium audio system
• Car stereo
• Television broadcasting equipment
• Gaming industry
• ECG equipment
• PDA
• Portable media players
• High speed sample
• Strain gauges