TLC5620IN Overview

In the 14-DIP (0.300, 7.62mm) package, you will find it. In order to operate it, a voltage supply of 5V volts is required. FPGA parts like this belong to the Other Converters family. Through Hole-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. 14 terminations are present in total. You can find related parts by using the part number TLC5620, which is its base part number. In order to make it work, 14 pins have been designed. Its flexibility is fully utili5Ved when operated with a supply voltage of 5V. There is a 5V power supply that is required to operate it. With a total of 14 pins, it is equipped with a high level of security. It can accept a maximum voltage of 5.25V volts as a supply voltage. A minimal supply voltage of 4.75V is required for it to operate.

TLC5620IN Features

14-DIP (0.300, 7.62mm) package
14 pin count
14 pins
the output voltage of 3.5V

TLC5620IN Applications

There are a lot of Texas Instruments
TLC5620IN Digital to Analog Converters (DAC) applications.

• Data Acquisition Systems
• Calibration
• Motor Control
• Data Distribution System
• Digital Potentiometer
• Software Radio
• Wireless infrastructure:
• WCDMA, CDMA2000, TD-SCDMA, WiMAX
• Wideband communications:
• LMDS/MMDS, point-to-point