TLC5905PAPG4 Overview

Using its TQFP package, it is possible to save board space. LED drivers design with 16 outputs.A frequency of 15MHz is used to operate it.The operation of this system is supported by 64 terminations.This configuration is built upon 64 pins.16 segments are present.The mount is in the way of Surface Mount.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.Its output voltage is 17V.The device has a pin count of 64.In addition to Display Drivers, it is also classified by its characteristics.A minimal supply voltage of 4.5V is required for it to achieve the highest efficiency.It is possible to provide high efficiency when the maximal supply current is less than 70mA.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -20°C in order to achieve stable operation.It is necessary to power systems with a voltage of 5VIC LED DISPLAY DRIVER is used on this part as an interface IC.Keep the part's output current at 80mA volts.

TLC5905PAPG4 Features

Available in the TQFP package
Frequency of 15MHz
Supply voltage of 5V
Operating with the supply voltage of 5V

TLC5905PAPG4 Applications

There are a lot of Texas Instruments
TLC5905PAPG4 LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights