TLC5925IDBQRG4 Overview
There is also a SSOP package that is used to save space on the board. Using this LED driver, there are 16 outputs.It operates on the basis of the frequency of 30MHz.It operates with terminations of 24.This LED driver is configured with a base of 24 pins.It is estimated that there are 16 segments.Ideally, the supply voltage should be 5.5V.It produces a voltage of 17V volts.In addition, it is equipped with a total of 24 pins.Additionally, it is categorized into Display Drivers according to its characteristics.It operates at a voltage of 3V as its minimal input voltage.To meet highest efficiency standards, it works on a supply voltage of 3V.Supply current cannot exceed 5.5V.Temperatures should not exceed 85°C in order to ensure stable operation.Maintaining a temperature above -40°C is essential for stabilizing operation.LED drivers can deliver all benefits of 45mA due to their maximum output current.The interface IC for this part is marked with the LED DISPLAY DRIVER.The output current should remain at 45mA.
TLC5925IDBQRG4 Features
Available in the SSOP package
Frequency of 30MHz
TLC5925IDBQRG4 Applications
There are a lot of Texas Instruments
TLC5925IDBQRG4 LED Driver ICs applications.
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Industrial LED Lighting: Image Recognition Devices
