TLC5928PWPG4 Overview

Using its HTSSOP EP package, it is possible to save board space. A frequency of 35MHz is used to operate it.The operation of this system is supported by 24 terminations.This configuration is built upon 24 pins.16 segments are present.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.Its output voltage is 17V.The device has a pin count of 24.In addition to Display Drivers, it is also classified by its characteristics.With 3V as the minimal input voltage, it operates.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.The maximum supply current is 5.5V.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.IC LED DISPLAY DRIVER is used on this part as an interface IC.Keep the part's output current at 35mA volts.

TLC5928PWPG4 Features

Available in the HTSSOP EP package
Frequency of 35MHz
Supply voltage of 3.3V

TLC5928PWPG4 Applications

There are a lot of Texas Instruments
TLC5928PWPG4 LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights