TLC5943PWP Overview

There is a 28-PowerTSSOP (0.173, 4.40mm Width) package on the board that is used to save space. A LED driver using this design has 16 outputs.It is mounted using Surface Mount.Linear emerges with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight has many benefits.The operation of this system is supported by 28 terminations.The configuration of the board is built around 28 pins.There are estimated to be 16 segments.TLC5943 is the base part number for the LED driver.It is acceptable to supply voltages of 5.5V.This device has an output voltage of 17V volts.In this device, there are 28 pins.As a result, its characteristics can also be categorized as Display Drivers.When the input voltage is set to 3V, it operates.For maximum efficiency, it operates at the minimal voltage of 3V.The allowable maximum value of supply current reaches 5.5V.When the maximum supply current is below 50mA, the device can deliver high efficiency.The load is capable of receiving 50mA current.This electronic component can fully perform its functions when the switching frequency is kept at 30MHz.

TLC5943PWP Features

Available in the 28-PowerTSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.3V
Switching frequency of 30MHz

TLC5943PWP Applications

There are a lot of Texas Instruments TLC5943PWP LED Driver ICs applications.

• Refrigeration lighting
• General lighting
• High-end retail lighting
• Linear fluorescent
• Dimmable LED for vehicle interiors
• A- lamps
• Street lighting
• Medical surgery lighting
• Down lighting
• LED Lightings for Industrial Equipment