TLC5946PWG4 Overview

Using its TSSOP package, it is possible to save board space. A frequency of 30MHz is used to operate it.The operation of this system is supported by 28 terminations.This configuration is built upon 28 pins.16 segments are present.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.Its output voltage is 17V.The device has a pin count of 28.With 3V as the minimal input voltage, it operates.A minimal supply voltage of 3V is required for it to achieve the highest efficiency.The maximum supply current is 5.5V.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.When operating at the maximum output current of 40mA, it is capable of providing all the benefits associated with LED drivers.IC LED DISPLAY DRIVER is used on this part as an interface IC.

TLC5946PWG4 Features

Available in the TSSOP package
Frequency of 30MHz
Supply voltage of 3.3V

TLC5946PWG4 Applications

There are a lot of Texas Instruments
TLC5946PWG4 LED Driver ICs applications.

• Gallery lighting
• Museum lighting
• High-end retail lighting
• Medical surgery lighting
• Replacement lamps
• Panel lighting
• Down lights
• Linear fluorescent
• A- lamps
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights