TLC7705ID Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 2.7V. In a 1 supply voltage, the PMIC chip conducts. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 8 pins are located on this power management. Pin count of the power management is 8. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 9μA volt supply current. Additionally, there are many other features that can be found inside of the power management, such as [0]. If you want to search for similar IC managements of this manufacturer, you can always refer to TLC7705, which is the base power ics number. Voltage supervisor can work with a supply temperature of 16μA at the most.

TLC7705ID Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7705ID Applications

There are a lot of Texas Instruments TLC7705ID Voltage Supervisors applications.

• Power communication system
• Power distribution systems of ICU
• Functional modules
• Rechargeable batteries
• Detection of phase imbalance
• Multi-voltage system
• Battery-powered equipment
• Power distribution systems of infant care room
• DC stabilized power supply module
• Medical-specific isolation transformer