TLC7705QPWR Overview

Power management is mounted through 8 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-TSSOP (0.173, 4.40mm Width) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 2.7V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. There are 8 pins on the supervisor. IC management can only work with a supply voltage of 2V volts. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 9μA. As well as this, there are other features to mention such as [0], for example. A similar IC managements number of the manufacturer can always be found by using TLC7705, the base power ics number. The maximum supply temperature is 16μA.

TLC7705QPWR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TLC7705QPWR Applications

There are a lot of Texas Instruments TLC7705QPWR Voltage Supervisors applications.

• Electronics installed in the vehicle
• Personal computers
• DC stabilized power supply module
• Leakage protection
• Dash board
• Utility meter
• Battery-powered equipment
• Analog circuit
• Radio
• Smartphones