TLC7725QDG4 Overview

A total of 8 terminals are used to mount this power management. Packaged in the form of a Tube, power management is easy to use. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. During operation, the power ic is supplied with a voltage of 1. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 8 pins on the board. Pin count of the power management is 8. IC management can only work with a supply voltage of 2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 16μA. As well as this, there are other features to mention such as [0], for example. For similar manage ics search of the manufacturer, you can always refer to TLC7725, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 16μA.

TLC7725QDG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
16μA operating supply current

TLC7725QDG4 Applications

There are a lot of Texas Instruments TLC7725QDG4 Voltage Supervisors applications.

• Insulation fault location system
• Urban rail transit weak current power monitoring
• Unattended substation automation
• Military electronics
• Stable power system
• Battery-powered equipment
• Detection of phase imbalance
• Kitchen appliances
• Display equipment
• Consumer electronics