TLV1508IDW Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 20-SOIC (0.295, 7.50mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3.3V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 200k Hz.The input type of this electronic AD converter is Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to TLV1508 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single can be used to categorize supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.5V.The ADC converter operates with the maximal supply voltage of 5.5V.4 inputs are employed.It operates with the minimal supply voltage of 2.7V.The output formats of this electrical AD converter are SERIAL , which are used to determine which data is exported and how data is displayed in many areas of OLIB.This electrical digital converter operates from a supply voltage of 3.3V.The ADC converter operates from 3/5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.294W. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 3.3mW.The conversion rate of this electrical AD converter is calculated as 200 ksps.The ADC converter consists of 1 elements.The digital converter operates with the minimal supply voltage (DC) of 2.7V.The ADC converter operates with the maximal supply voltage (DC) of 5.5V.There are 8 analog transmissions, which are both based on how they adapt data to combine an input signal with a carrier signal. The output voltage is maintain at 2.4V.

TLV1508IDW Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 2.7V
3/5V power supplies
1 elements
Maximal supply voltage (DC) of 5.5V

TLV1508IDW Applications

There are a lot of Texas Instruments TLV1508IDW ADC applications.

• Spectrum Analysis
• Digital Multimeters, PLC's (Programming Logic Controllers)
• Industrial Process Control
• GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
• Medical Instrumentation and medical imaging
• CMOS Image sensors for mobile applications
• Automotive
• Wireless and wired broadband communications
• TD-SCDMA, WiMAX
• Handheld Terminal Interface