TLV2324IPWG4 Overview
It is packaged in an TSSOP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Rail/Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 10mV for input offset voltage. A supply current of 39μA can be used to operate this linear amplifier. Maintain 114.32dB as the voltage gain. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use instrumentation amplifier at temperatures that are no higher than 85°C. A voltage rating of 4 is indicated for the op amp's operating supply voltage. It is important to keep in mind that the power supply voltage of this electric component is below 8V, which is suitable. Keeping the linear amplifier's supply voltage above 2V is recommended.
TLV2324IPWG4 Features
14 Pins
supply voltage of 3V
114.32dB voltage gain
TLV2324IPWG4 Applications
There are a lot of Texas Instruments
TLV2324IPWG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
